/ / Top spokes diagram and description from the magazine Crealana

Top spokes diagram and description from the magazine Crealana

Top spokes scheme

Top spokes diagram and description from the magazine Crealana

Scheme and description of the top with knitting needles made of silk

Knitted top with knitting needles, the skeleton scheme along the edges of the armhole includes all the increments and decreases that are performed in the work.

The size: S (M, L)
Materials: 300 (350, 400) yarn SCHULANA "Fashion-Silk" (85% silk, 15% polyamide, 50 g / 110 m), spokes 6.0 and 7.0 mm., Circular spokes 5.0 mm., The length of the spokes is 60 cm ., Hook 5.0 mm., 3 buttons with a diameter of 15 mm.
Knitting density: 17.5 p. * 23 r. = 10 * 10 cm. Facial smoothness, knitting needles 7.0 mm.

Elastic: With spokes 6.0 mm. Knit 3 persons., 2 out. Along the row, in the next row knit the loops as they look.
Facial smoothness: With needles of 7.0 mm. Knit facial loops on the front side and purl loops from the wrong side.
Edge with a scythe scheme A - increase: With needles of 7.0 mm. Knit by the scheme A. The diagram shows the edges with braids, between the arrows c and b there is a facial smooth surface. Knit rows 1-34 - once, then repeat rows 33-34.
Edge with a scythe according to the scheme B - Decrease: With needles of 7.0 mm. Knit by the scheme A. The diagram shows the edges with braids, between the arrows c and b there is a facial smooth surface. Knit rows 1-26 - once, then repeat rows 25-26.
Attention! These schemes are not shown on the front side, as we usually see in knitting, the purlins are shown how they are tied, not how they are seen from the front side.

Top spokes diagram and description:

Before: ** dial 75 (80, 85) hinges with spokes 6.0 mm.
Knit 17 cm = 45 rows of rubber band, starting the purl series with 1 edge and 3 wrinkles. Loops.
In the last row of the rubber band, add 0 (0, 2) loops along the row = 75 (80, 87) loops.
Go for spokes 7.0 mm. To begin to carry out a smooth surface.
Knit by facial smoothness 19 cm = 44 rows. **
Begin to perform the edge with braids with augmentation according to scheme A, tying 47 (52, 59) loops between the arrows.
2 cm = 4 rows, put on each side the details of the mark (the armholes will start from here).
Knit the rows of the A1-34 scheme - once.
After the last series of additions = 87 (92, 99) loops.
Then repeat rows 33-34 of circuit A.
At the height of 14 (15, 16) = 34 (34, 36) rows from the marks for the armhole, select the central 27 (28, 27) loops for the neck. Spray two faces together. - Twelve times these loops are allocated (that is, 2 together, only 24 loops of 27 (28, 27) loops are sewn).
In the next row, the remaining loops are highlighted.
Continue to knit the sides separately, simultaneouslyReduce from the side of the neck in each second row 4 loops - 1 time, 3 loops - 2 times, 2 loops - 2 times and 1 loop - 1 time = 15 (17, 21) loop for each shoulder
At a height of 6 cm = 14 rows from the neck
Perform another 1 row in the pattern in which to tie (2 together faces) - 3 times over the braid loops = 12 (14, 18) loops.
Remove the hinges on the additional spoke.

Back: Knit like before before ** - **
Begin to perform the edge with the braids with the cuts according to scheme B, tying 25 (30, 37) loops between the arrows.
Put tags for the armhole as for the transfer.
Knit the rows of circuit B1-26 - once.
After the last series of deductions = 55 (60, 67) loops.
Then repeat rows 25-26 of circuit B.
At the height of 12.5 (13.5, 14.5) cm = 28 (30, 32) of the row from the armhole to divide the work - turn the piece after 27 (30, 33) loops.
Continue to knit the sides separately.
To get from the side of the neck 1 loop - 28 (31, 34) loops.
Knit in the pattern as before 6 cm. = 14 rows.
Close from the side of the neck in each second row 9 (10-9) loops - 1 time, then 4 loops - 1 time.
Perform another 1 row in the pattern in which to tie (2 together faces) - 3 times over the braid loops = 12 (14, 18) loops.
Remove the hinges on the additional spoke.
Repeat for the other side, but do not get here 1 loop from the side of the neck and close for the throat 9 loops for all sizes.

Assembling and finishing: Wet and dry parts, connect the shoulders, closing the backrest loops and transferring together with the 3rd knitting needle, sew the sides from the marks.
On the front side with spokes 5.0 mm. Dial 62 loops around the neck (32 loops for the neck and 15 loops for each side of the neck).
Knit 22 rows of facial smoothness.
Close loops loosely.
On the left side of the backrest, crochet 3 buttonholes: knit with bunches without a napkin along the side and 7 in / n. In place for each loop.
Sew 3 buttons on the right side of the backrest.
Tie the armholes with columns without a crochet.

Place text on other sites - it's forbidden!

Top spokes diagram:

Top spokes scheme

Pay attention to: